Skip to content
ossf

GitHub Action

OSSF Scorecard action

v2.4.0 Latest version

OSSF Scorecard action

ossf

OSSF Scorecard action

Run OSSF Scorecard checks and output results in SARIF format

Installation

Copy and paste the following snippet into your .yml file.

              

- name: OSSF Scorecard action

uses: ossf/[email protected]

Learn more about this action in ossf/scorecard-action

Choose a version

Scorecards' GitHub action

CodeQL codecov OpenSSF Scorecard

Official GitHub Action for OSSF Scorecards.

The Scorecards GitHub Action is free for all public repositories. Private repositories are supported if they have GitHub Advanced Security. Private repositories without GitHub Advanced Security can run Scorecards from the command line by following the standard installation instructions.

Breaking changes in v2

Starting from scorecard-action:v2, GITHUB_TOKEN permissions or job permissions needs to include id-token: write for publish_results: true. This is needed to access GitHub's OIDC token which verifies the authenticity of the result when publishing it. See details here

If publishing results, scorecard-action:v2 also imposes new requirements on both the workflow and the job running the ossf/scorecard-action step. For full details see here.


Installation

View Results

Manual Action Setup

Reporting vulnerabilities


The following GitHub triggers are supported: push, schedule (default branch only).

The pull_request and workflow_dispatch triggers are experimental.

Running the Scorecard action on a fork repository is not supported.

GitHub Enterprise repositories are not supported.

Installation

Workflow Setup (Required)

  1. From your GitHub project's main page, click “Security” in the top ribbon.

    image

  2. Select “Code scanning”.

    image

  3. Depending on whether the repository already has a scanning tool configured, you will see "Add tool" or "Configure scanning tool.

    a. If you see "Add tool" click it and skip step b.

    image

    If you see "Configure scanning tool" proceed to step b:

    image

    b. After clicking "Configure scanning tool", click "Explore workflows" underneath the "Other tools" section:

    image

  4. Choose the "OSSF Scorecard" from the list of workflows below, and then click “Configure”. (To find it faster type "OSSF" in searchbox.)

    image

  5. Commit the changes. (Your button might say "Commit changes..." instead of "Start commit", it does the same thing.)

    image

Authentication with Fine-grained PAT (optional)

Scorecard can run successfully with the workflow's default GITHUB_TOKEN, which is our recommended approach. However, Scorecard Action requires additional permissions if you use GitHub's classic Branch Protection settings and want to see it reflected in your results. You can read more about how to configure Scorecard Action for these cases here.

GitHub's new Repository Rules are accessible to Scorecard Action with the workflow's default GITHUB_TOKEN. We recommend new repositories use Repository Rules so they can be read with the default GitHub token. Repositories that already use classic Branch Protection and wish to see their results without an admin token should consider migrating to Repository Rules.

View Results

The workflow is preconfigured to run on every repository contribution. After making a code change, you can view the results for the change either through the Scorecard Badge, Code Scanning Alerts or GitHub Workflow Runs.

REST API

Starting with scorecard-action:v2, users can use a REST API to query their latest run results. This requires setting publish_results: true for the action and enabling id-token: write permission for the job (needed to access GitHub OIDC token). The API is available here: https://api.scorecard.dev.

Scorecard Badge

Starting with scorecard-action:v2, users can add a Scorecard Badge to their README to display the latest status of their Scorecard results. This requires setting publish_results: true for the action and enabling id-token: write permission for the job (needed to access GitHub OIDC token). The badge is updated on every run of scorecard-action and points to the latest result. To add a badge to your README, copy and paste the below line, and replace the {owner} and {repo} parts.

[![OpenSSF Scorecard](https://api.scorecard.dev/projects/github.com/{owner}/{repo}/badge)](https://scorecard.dev/viewer/?uri=github.com/{owner}/{repo})

Once this badge is added, clicking on the badge will take users to the latest run result of Scorecard.

image

Code Scanning Alerts

A list of results is accessible by going in the Security tab and clicking "Code Scanning Alerts" (it can take a couple minutes for the run to complete and the results to show up). Click on the individual alerts for more information, including remediation instructions. You will need to click "Show more" to expand the full remediation instructions.

image

Verify Runs

The workflow is preconfigured to run on every repository contribution.

To verify that the Action is running successfully, click the repository's Actions tab to see the status of all recent workflow runs. This tab will also show the logs, which can help you troubleshoot if the run failed.

image

Troubleshooting

If the run has failed, the most likely reason is an authentication failure. Confirm that the Personal Access Token is saved as an encrypted secret within the same repository (see Authentication). Also confirm that the PAT is still valid and hasn't expired or been revoked.

If you have a valid PAT saved as an encrypted secret and the run is still failing, confirm that you have not made any changes to the workflow yaml file that affected the syntax. Review the workflow example and reset to the default values if necessary.

Manual Action Setup

If you prefer to manually set up the Scorecards GitHub Action, you will need to set up a workflow file.

First, create a new file in this location: [yourrepo]/.github/workflows/scorecards.yml. Then use the input values below.

Inputs

Name Required Description
result_file yes The file that contains the results.
result_format yes The format in which to store the results [json | sarif]. For GitHub's scanning dashboard, select sarif.
repo_token no PAT token with repository read access. Follow these steps to create it.
publish_results recommended This will allow you to display a badge on your repository to show off your hard work. See details here.

Publishing Results

The Scorecard team runs a weekly scan of public GitHub repositories in order to track the overall security health of the open source ecosystem. The results of the scans are publicly available. Setting publish_results: true replaces the results of the team's weekly scans with your own scan results, helping us scale by cutting down on repeated workflows and GitHub API requests. This option is also needed to enable badges on the repository.

Workflow Restrictions

If publishing results, our API enforces certain rules on the producing workflow, which may reject the results and cause the Scorecard Action run to fail. We understand that this is restrictive, but currently it's necessary to ensure the integrity of our API dataset, since GitHub workflow steps run in the same environment as the job they belong to. If possible, we will work on making this feature more flexible so we can drop this requirement in the future.

Global workflow restrictions

  • The workflow can't contain top level env vars or defaults.
  • No workflow level write permissions.
  • Only the job with ossf/scorecard-action can use id-token: write permissions.

Restrictions on the job containing ossf/scorecard-action

  • No job level env vars or defaults.
  • No containers or services
  • The job should run on one of the Ubuntu hosted runners
  • The steps running in this job must belong to this approved list of GitHub actions.
    • "actions/checkout"
    • "actions/upload-artifact"
    • "github/codeql-action/upload-sarif"
    • "ossf/scorecard-action"
    • "step-security/harden-runner"

Uploading Artifacts

The Scorecards Action uses the artifact uploader action to upload results in SARIF format to the Actions tab. These results are available to anybody for five days after the run to help with debugging. To disable the upload, comment out the Upload Artifact value in the Workflow Example.

Note: if you disable this option, the results of the Scorecards Action run will be only available to people with write access or more. You can find the results on the Security tab scanning dashboard).

Workflow Example

Please see our workflow from ossf/scorecard for an up-to-date example. https://github.com/ossf/scorecard/blob/main/.github/workflows/scorecard-analysis.yml

Reporting vulnerabilities

If you find a vulnerability, please report it to us! See SECURITY.md for more information.